如何設定雙犬自行車牽引／滑板車牽引繩：逐步指南

Quick Answer

To set up a two-dog bikejor or scooter line, you'll need a properly fitted gangline that connects your dogs to your bike or scooter. Start by choosing a modular or sectional gangline that matches your team size, then attach the necklines and tuglines to your dogs' harnesses, and finally secure the mainline to your bike or scooter using a bungee or shock-absorbing system.

Bikejoring and scootering with two dogs is an exciting way to get outdoors and give your dogs a great workout. But setting up the line correctly is crucial for both safety and performance. In this guide, we'll walk you through the steps to set up a two-dog bikejor or scooter line, from selecting the right gangline to making the final attachment to your bike or scooter.

Whether you're a beginner or have some experience, understanding how the line components work together will help you avoid tangles, prevent injuries, and ensure a smooth ride. Let's get started.

Choosing the Right Gangline for Two Dogs

The foundation of your setup is the gangline. For two dogs, you have two main options: a modular cable gangline section or a sectional cable gangline. A modular section, like the 2-Dog Modular Cable Gangline Section, allows you to add or remove sections to build any size team. This is great if you plan to expand your team later. A 6-Dog Sectional Cable Gangline includes two individual sections and a leader section, which might be more than you need for just two dogs, but it gives you room to grow.

When choosing, consider the material and strength. Cable-filled lines, such as those with galvanized aircraft cable sheathed in polyethylene rope, offer maximum durability and are less likely to be chewed through. Rope-only lines are lighter but may not hold up as well if your dogs are chewers. Also, think about the length of the line and how it will handle on turns and hills.

• Check the tensile strength of the mainline to ensure it can handle the pull of two dogs.
• If your dogs are prone to chewing, opt for a cable-filled line to extend the life of your gear.

Attaching the Gangline to Your Dogs

Once you have your gangline, the next step is to attach it to your dogs. Each dog should have a well-fitted harness, such as the Urban Trail® Adjustable Harness. This harness is custom-fit to your dog's measurements, ensuring a comfortable and secure fit. Attach the neckline to the collar or harness ring, and the tugline to the harness back ring. Make sure the lines are not too tight or too loose; you want enough slack for the dogs to move freely but not so much that they can tangle.

Position your dogs side by side, with the mainline running between them. The necklines should be adjusted so that each dog has about 6-12 inches of slack. The tuglines should be attached to the harness at a point that allows the dog to pull comfortably without putting strain on the neck. Check that all snaps are secure and that the lines are free of twists or tangles before you start.

• Always use a harness designed for pulling, not a collar, to avoid neck injuries.
• Do a quick tug test on each line to ensure the snaps are secure before heading out.

Attaching the Line to Your Bike or Scooter

The way you attach the gangline to your bike or scooter is critical for safety. You'll need a sturdy attachment point, such as a tow hook or a specially designed bracket. For scooters, this is often a tow point near the rear axle. For bikes, you may need a handlebar attachment or a tow bar. The line should be attached with a bungee or shock-absorbing section to take up the slack and reduce jerks. This is especially important when your dogs are starting or stopping.

If you're using a scooter, ensure the line is attached to a point that allows the dogs to pull without interfering with your steering. For bikes, the line should be attached to the handlebar or a tow bar that keeps it away from the front wheel. Always test the setup in a safe, open area before going on a trail.

• Use a bungee or shock-absorbing line to prevent sudden jolts from causing accidents.
• Make sure the line is not too long, as it can drag on the ground or get caught in your wheels.

Common Mistakes to Avoid

One common mistake is using a line that is too long, which can cause it to drag and get caught on obstacles. Another is attaching the line to the wrong part of the harness, which can cause discomfort or injury to your dog. Also, failing to check the condition of your line and snaps before each ride can lead to equipment failure at the worst possible time.

To avoid these issues, always measure the length of your line to ensure it's appropriate for your setup. Regularly inspect your gear for wear and tear, especially the snaps and the rope. And always use a harness that is properly fitted to your dog's body, like the Urban Trail® Adjustable Harness, which is custom-made to your dog's measurements.

• Before each ride, do a quick check of all snaps and connections.
• If you're using a modular gangline, make sure the sections are properly connected and locked.

Step-by-Step Setup Checklist

1. Choose your gangline: Select a two-dog modular or sectional gangline that fits your team size and activity. Consider the material and strength based on your dogs' behavior. Check that the mainline's tensile strength is sufficient for your dogs' pulling power.
2. Fit the harnesses: Ensure each dog has a properly fitted harness, ideally custom-made to their measurements. Attach the neckline and tugline to the correct rings. The harness should be snug but allow full range of motion without chafing.
3. Attach the line to your bike or scooter: Secure the gangline to a sturdy attachment point using a bungee or shock-absorbing section. Test the setup in a safe area before riding. Make sure the line doesn't interfere with your steering or wheels.

Products That Help with Your Setup

• 2-Dog Modular Cable Gangline Section: Versatile, modular 2-Dog section makes it easy to add or remove sections to build any size gangline. 10mm polyethylene rope mainline sections are filled with 2,000 pound tensile strength galvanized aircraft cable for maximum strength and durability. This modular section is perfect for a two-dog setup and gives you the flexibility to expand your team later without buying a whole new line.
• Urban Trail® Adjustable Harness (Half-Back/Shorty) - CUSTOM FIT: CUSTOM FIT means that each harness is cut & sewn to order to your dog's exact measurements and specifications that you provide, ensuring a comfortable like-a-glove fit for your best friend. A properly fitted harness is essential for comfort and performance, preventing chafing and ensuring your dog can pull efficiently.
• Cable-Filled Leader Tug Extender: Our Cable-Filled Leader Tug Extender is perfect for preventing Swing dogs from chewing through Leader Tugs! 10mm poly rope filled with 1/8 inch galvanized aircraft cable, approximately 16 inches long. If your dogs are chewers, this extender can protect your tuglines and save you money on replacements.

Setting up a two-dog bikejor or scooter line doesn't have to be complicated. By choosing the right gangline, fitting your dogs with proper harnesses, and attaching everything securely, you can enjoy a safe and fun ride with your canine teammates. Always inspect your gear before each outing and make adjustments as needed. Happy trails!